Meraki Multigigabit 10G PoE++ Power Injector (30W/802.3bt) | MA - INJ - 6 - Network Warehouse

Meraki Multigigabit 10G PoE++ Power Injector (30W/802.3bt) | MA-INJ-6

£231.67 exc vat
£278.00 inc vat

MA-INJ-6

17

We have 17 in stock.
   


Key Features

  • Power cord not included, see options below.
  • Reduces cost and simplifies installations by eliminating the need to provide separate power lines.
  • Increases installation flexibility by powering devices from up to 100 metres away.
  • Fully IEEE 802.3bt PoE++ standard compliant.
  • Supports 10/100/1000BASE-T and 10 Gbps multi-gigabit Ethernet.
  • Power, load detection and fault diagnostics LEDs.

For use with:-

Access Points
MR28
MR36
MR44
MR46
MR46E
MR56
MR57
MR76
MR78
MR86
CW9164
CW9166


Options
Meraki UK Power Cord

Downloads
Product Information

About This Product
The Meraki MA-INJ-6 10-Gigabit Power Over Ethernet PoE++ Injector provides increased flexibility, as well as reduced installation time and cost. One of the main constraints when designing your wireless network is the availability of power. Running power cabling is also a primary cost driver of wireless installations. The Meraki MA-INJ-6 10-Gigabit Power Over Ethernet PoE++ Injector allows delivery of both data and power to a Meraki access point (sold separately) over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost.

802.3bt PoE Injector
The Meraki multi-gigabit 802.3bt PoE Injector MA-INJ-6 provides fully-compliant 802.3bt detection, with disconnect, short-circuit and overload protection. This ensures that only 802.3bt, 802.3at and 802.3af devices receive power, and non-compliant devices are not accidentally damaged. Using this injector, it is possible to power the latest generation of Wifi 6 devices that require 802.3bt power delivered via 10G multi-gigabit interfaces, as well as providing backward compatibility with legacy 802.11n devices with traditional 802.3af power. Regardless of the deployment scenario, powering Meraki devices with multi-gigabit 802.3bt Power over Ethernet is a flexible and low-cost method of simplifying the installation process, while also ensuring that network design is not compromised by power availability limitations.


Key Features

  • Power cord not included, see options below.
  • Reduces cost and simplifies installations by eliminating the need to provide separate power lines.
  • Increases installation flexibility by powering devices from up to 100 metres away.
  • Fully IEEE 802.3bt PoE++ standard compliant.
  • Supports 10/100/1000BASE-T and 10 Gbps multi-gigabit Ethernet.
  • Power, load detection and fault diagnostics LEDs.

For use with:-

Access Points
MR28
MR36
MR44
MR46
MR46E
MR56
MR57
MR76
MR78
MR86
CW9164
CW9166


Options
Meraki UK Power Cord

Downloads
Product Information

About This Product
The Meraki MA-INJ-6 10-Gigabit Power Over Ethernet PoE++ Injector provides increased flexibility, as well as reduced installation time and cost. One of the main constraints when designing your wireless network is the availability of power. Running power cabling is also a primary cost driver of wireless installations. The Meraki MA-INJ-6 10-Gigabit Power Over Ethernet PoE++ Injector allows delivery of both data and power to a Meraki access point (sold separately) over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost.

802.3bt PoE Injector
The Meraki multi-gigabit 802.3bt PoE Injector MA-INJ-6 provides fully-compliant 802.3bt detection, with disconnect, short-circuit and overload protection. This ensures that only 802.3bt, 802.3at and 802.3af devices receive power, and non-compliant devices are not accidentally damaged. Using this injector, it is possible to power the latest generation of Wifi 6 devices that require 802.3bt power delivered via 10G multi-gigabit interfaces, as well as providing backward compatibility with legacy 802.11n devices with traditional 802.3af power. Regardless of the deployment scenario, powering Meraki devices with multi-gigabit 802.3bt Power over Ethernet is a flexible and low-cost method of simplifying the installation process, while also ensuring that network design is not compromised by power availability limitations.


Related Products

You haven't placed any content yet.