DrayTek VigorAP Managed PoE Wireless 802.11n Access Point | AP810-K | EOL


£86.90 exc vat
£104.28 inc vat

Contact Support

AP810-K



Key Features

  • Business-class 802.11n WLAN access point.
  • Manageable by DrayTek Wireless Management.
  • Can be powered supplied PSU or Standard 802.3af PoE (Power-over-Ethernet)
  • 2.4GHz Wireless
  • Up to 300Mbps Wireless LAN
  • 5 Ethernet Ports for AP mode or for Wireless Bridging
  • Detachable Antennae - Can be replaced with uni-directional or higher-gain
  • Up to four distinct SSIDs (for VLANs)
  • 802.1q VLAN Tagging for each SSID & Management


Downloads
Datasheet

About The Product
The DrayTek Vigor AP-810 is a standalone WiFi access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system. This DrayTek Vigor AP-810 replaces the popular DrayTek Vigor AP-800, adding full compatibility with the DrayTek managed wireless platform. 

Wireless Security & VLANs
The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.

For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.

The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID.

This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data/devices.

Central Management with DratTek VigorACS
The DrayTek VigorAP 810 can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.

The DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the Configuration section of VigorACS.

Profiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration > AP Profile to configure profiles and apply them selectively.

DrayTek's VigorACS management monitors the VigorAP 810, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status.

Power-over-Ethernet
The AP-810 supports PoE (Power over Ethernet) as standard (built-in) so if the AP-810 is connected to a PoE enabled Ethernet switch or PoE injector, you don't need any local power to the unit (power supply) - the AP-810 will take its power from the Ethernet cable. This is ideal for situations where you do not have mains power available in the exact location where you want to install the AP-810 or just for general aesthetic neatness, perhaps where the AP-810 is installed somewhere prominent: The AP-810 is also supplied with an AC/DC mains PSU for installations where you are not using PoE.


Key Features

  • Business-class 802.11n WLAN access point.
  • Manageable by DrayTek Wireless Management.
  • Can be powered supplied PSU or Standard 802.3af PoE (Power-over-Ethernet)
  • 2.4GHz Wireless
  • Up to 300Mbps Wireless LAN
  • 5 Ethernet Ports for AP mode or for Wireless Bridging
  • Detachable Antennae - Can be replaced with uni-directional or higher-gain
  • Up to four distinct SSIDs (for VLANs)
  • 802.1q VLAN Tagging for each SSID & Management


Downloads
Datasheet

About The Product
The DrayTek Vigor AP-810 is a standalone WiFi access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system. This DrayTek Vigor AP-810 replaces the popular DrayTek Vigor AP-800, adding full compatibility with the DrayTek managed wireless platform. 

Wireless Security & VLANs
The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.

For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.

The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID.

This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data/devices.

Central Management with DratTek VigorACS
The DrayTek VigorAP 810 can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.

The DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the Configuration section of VigorACS.

Profiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration > AP Profile to configure profiles and apply them selectively.

DrayTek's VigorACS management monitors the VigorAP 810, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status.

Power-over-Ethernet
The AP-810 supports PoE (Power over Ethernet) as standard (built-in) so if the AP-810 is connected to a PoE enabled Ethernet switch or PoE injector, you don't need any local power to the unit (power supply) - the AP-810 will take its power from the Ethernet cable. This is ideal for situations where you do not have mains power available in the exact location where you want to install the AP-810 or just for general aesthetic neatness, perhaps where the AP-810 is installed somewhere prominent: The AP-810 is also supplied with an AC/DC mains PSU for installations where you are not using PoE.

Related Products

You haven't placed any content yet.