MA-INJ-6 | Meraki Power Injector 802.3bt


£217.64 exc vat
£261.17 inc vat

MA-INJ-6

4

We have 4 in stock.
   


The MA-INJ-6 is a Meraki 10G PoE++ injector (802.3bt) that delivers both data and power to a Meraki access point through a single Ethernet cable.

Key Features

  • Power cord not included, see options below.
  • Reduces cost and simplifies installations by eliminating the need to provide separate power lines.
  • Increases installation flexibility by powering devices from up to 100 metres away.
  • Fully IEEE 802.3bt PoE++ standard compliant.
  • Supports 10/100/1000BASE-T and 10 Gbps multi-gigabit Ethernet.
  • Power, load detection and fault diagnostics LEDs.

For use with:-

Access Points
MR28
MR36
MR44
MR46
MR46E
MR56
MR57
MR76
MR78
MR86
CW9164
CW9166


Options

Meraki UK Power Cord

Downloads
Product Information

About This Product
The MA-INJ-6 enhances flexibility, reduces installation time, and lowers costs. Power availability is a key constraint in wireless network design, and running power cables is a major cost factor. The Meraki Multigigabit PoE injector delivers both data and power to a Meraki access point via a single Ethernet cable, enabling device deployment exactly where needed for optimal wireless coverage at a lower installation cost.

The Meraki Multigigabit 802.3bt PoE Injector MA-INJ-6 ensures full compliance with 802.3bt standards, including detection, disconnect, short-circuit, and overload protection. This guarantees that only 802.3bt, 802.3at, and 802.3af devices receive power, preventing accidental damage to non-compliant devices.

This injector can power the latest WiFi-6, 6E, and future WiFi-7 devices requiring 802.3bt power via 10G Multigigabit interfaces, while also supporting legacy 802.11n devices with traditional 802.3af power. Regardless of the deployment scenario, using Multigigabit 802.3bt Power over Ethernet to power Meraki devices is a flexible, cost-effective method that simplifies installation and ensures network design is not limited by power availability.

🚀 1-2 Days Express Delivery

The MA-INJ-6 is a Meraki 10G PoE++ injector (802.3bt) that delivers both data and power to a Meraki access point through a single Ethernet cable.

Key Features

  • Power cord not included, see options below.
  • Reduces cost and simplifies installations by eliminating the need to provide separate power lines.
  • Increases installation flexibility by powering devices from up to 100 metres away.
  • Fully IEEE 802.3bt PoE++ standard compliant.
  • Supports 10/100/1000BASE-T and 10 Gbps multi-gigabit Ethernet.
  • Power, load detection and fault diagnostics LEDs.

For use with:-

Access Points
MR28
MR36
MR44
MR46
MR46E
MR56
MR57
MR76
MR78
MR86
CW9164
CW9166


Options

Meraki UK Power Cord

Downloads
Product Information

About This Product
The MA-INJ-6 enhances flexibility, reduces installation time, and lowers costs. Power availability is a key constraint in wireless network design, and running power cables is a major cost factor. The Meraki Multigigabit PoE injector delivers both data and power to a Meraki access point via a single Ethernet cable, enabling device deployment exactly where needed for optimal wireless coverage at a lower installation cost.

The Meraki Multigigabit 802.3bt PoE Injector MA-INJ-6 ensures full compliance with 802.3bt standards, including detection, disconnect, short-circuit, and overload protection. This guarantees that only 802.3bt, 802.3at, and 802.3af devices receive power, preventing accidental damage to non-compliant devices.

This injector can power the latest WiFi-6, 6E, and future WiFi-7 devices requiring 802.3bt power via 10G Multigigabit interfaces, while also supporting legacy 802.11n devices with traditional 802.3af power. Regardless of the deployment scenario, using Multigigabit 802.3bt Power over Ethernet to power Meraki devices is a flexible, cost-effective method that simplifies installation and ensures network design is not limited by power availability.

Related Products

You haven't placed any content yet.