Cisco 8841 Multi Platform IP Phone | CP-8841-3PCC-K9=


£164.00

CP-8841-3PCC-K9=

Contact Support



About This Product

With the Cisco 8841 Call Manager Phone, you can increase personal productivity through an engaging user experience that is both powerful and easy-to-use. This Cisco 8841 IP Phone combines an attractive ergonomic design with wideband audio for crystal clear voice communications, “always-on” reliability, encrypted voice communications to enhance security, and access to a comprehensive suite of unified communications features from Cisco on-premises and hosted infrastructure platforms and third party hosted call control.

Key Features

  • 5 Lines, 2 x Gigabit Ports, PoE, Colour Display
  • Ergonomic design: The phone offers an easy-to-use interface and provides a traditional telephony-like user experience
  • Graphical Display: The 5-inch, 800 × 480 resolution, widescreen VGA backlit colour display provides scrollable access to calling features and text-based XML applications
  • The Handset is a standard wideband-capable audio handset (connects through an RJ-9 port)
  • The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended)
  • The handset is hearing aid-compatible (HAC) and meets Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA)
  • 508 loudness requirements using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliant
  • The Speaker Phone: The full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free
  • For added security, the audible dual tone multi-frequency (DTMF) tones are masked when the speakerphone mode is used
  • Analogue Headset: The analogue headset jack is a standard wideband-capable RJ-9 audio port
  • AUX Port: You can use an auxiliary port to support electronic hookswitch control with a third-party headset connected to it
  • Ethernet Switch: An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC
  • The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic
  • Phone Keys: The phone has the following keys: > Line keys > Soft keys > Back and release keys > Four-way navigation and select keys > Hold/Resume, Transfer, and Conference keys > Messaging, Application, and Directory keys > Standard keypad > Volume-control toggle key > Speakerphone, headset, and mute keys
  • Backlit Indicator: Supports backlit indicators for the audio path keys (handset, headset, and speakerphone), select key, line keys, and message waiting
  • Replaceable Bezel: The phone includes a black bezel; an optional silver bezel is also available separately
  • Dual Position Foot Stand: The display is easy-to-view and the buttons and keys are easy-to-use
  • The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phone
  • Wall-Mountable: You can install the phone on a wall using an optional wall-mount kit (available separately)
  • Physical Security: The phone is compatible with the Kensington Security Slot (K-Slot) anti-theft system
  • Power Features: IEEE Power over Ethernet (PoE)
  • IEEE Power over Ethernet class 2. The phone is compatible with both IEEE 802.3af and 802.3at switch blades and supports both Cisco Discovery Protocol and Link Layer Discovery Protocol - power over Ethernet (LLDP-PoE)
  • Cisco IP Phone Power Cube 4: This optional power cube (sold separately) is used as an AC-to-DC (48V) power supply for non-PoE deployments
  • Use of the power cube 4 also requires the use of one of the corresponding AC country cords

Downloads

datasheet


About This Product

With the Cisco 8841 Call Manager Phone, you can increase personal productivity through an engaging user experience that is both powerful and easy-to-use. This Cisco 8841 IP Phone combines an attractive ergonomic design with wideband audio for crystal clear voice communications, “always-on” reliability, encrypted voice communications to enhance security, and access to a comprehensive suite of unified communications features from Cisco on-premises and hosted infrastructure platforms and third party hosted call control.

Key Features

  • 5 Lines, 2 x Gigabit Ports, PoE, Colour Display
  • Ergonomic design: The phone offers an easy-to-use interface and provides a traditional telephony-like user experience
  • Graphical Display: The 5-inch, 800 × 480 resolution, widescreen VGA backlit colour display provides scrollable access to calling features and text-based XML applications
  • The Handset is a standard wideband-capable audio handset (connects through an RJ-9 port)
  • The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended)
  • The handset is hearing aid-compatible (HAC) and meets Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA)
  • 508 loudness requirements using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliant
  • The Speaker Phone: The full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free
  • For added security, the audible dual tone multi-frequency (DTMF) tones are masked when the speakerphone mode is used
  • Analogue Headset: The analogue headset jack is a standard wideband-capable RJ-9 audio port
  • AUX Port: You can use an auxiliary port to support electronic hookswitch control with a third-party headset connected to it
  • Ethernet Switch: An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC
  • The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic
  • Phone Keys: The phone has the following keys: > Line keys > Soft keys > Back and release keys > Four-way navigation and select keys > Hold/Resume, Transfer, and Conference keys > Messaging, Application, and Directory keys > Standard keypad > Volume-control toggle key > Speakerphone, headset, and mute keys
  • Backlit Indicator: Supports backlit indicators for the audio path keys (handset, headset, and speakerphone), select key, line keys, and message waiting
  • Replaceable Bezel: The phone includes a black bezel; an optional silver bezel is also available separately
  • Dual Position Foot Stand: The display is easy-to-view and the buttons and keys are easy-to-use
  • The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phone
  • Wall-Mountable: You can install the phone on a wall using an optional wall-mount kit (available separately)
  • Physical Security: The phone is compatible with the Kensington Security Slot (K-Slot) anti-theft system
  • Power Features: IEEE Power over Ethernet (PoE)
  • IEEE Power over Ethernet class 2. The phone is compatible with both IEEE 802.3af and 802.3at switch blades and supports both Cisco Discovery Protocol and Link Layer Discovery Protocol - power over Ethernet (LLDP-PoE)
  • Cisco IP Phone Power Cube 4: This optional power cube (sold separately) is used as an AC-to-DC (48V) power supply for non-PoE deployments
  • Use of the power cube 4 also requires the use of one of the corresponding AC country cords

Downloads

datasheet

You haven't placed any content yet.