DrayTek VigorSwitch 24-Port Gigabit PoE+ Managed Switch + 4 x 10GbE SFP+ Ports | VSP2280X-K
VSP2280X-K
92
Key Features
- 24 x RJ-45 Gigabit Ethernet ports with PoE+.
- 4 x SFP+ 10GbE ports for Uplink / Fibre.
- PoE (Power-over-Ethernet) for IP phones, wireless access points, IP cameras etc.
- Generous power budget (400W total).
- 802.3af (PoE) ad 802.3at (High Power PoE)
- 802.1q VLANs (Tag, Port & MAC-based)
- VLAN Routing & Static Route with DHCP server / relay.
- Virtual Router Redundancy Protocol.
- QoS for Application traffic prioritisation.
- 802.1x RADIUS / TACACS+ Port Authentication with Accounting.
- Voice VLAN for QoS (OUI Mode).
- Access Control List (ACL).
- Port Mirroring & Link Aggregation.
- IGMP Snooping/Querier (up to 256 Multicast Groups).
- IPv4 and IPv6 Support.
- Hardware Monitor with smart fan control.
- Centrally managed or standalone operation.
- Console Port
Downloads
Datasheet
About This Product
The VigorSwitch P2280x is a high-performance, L2+ Managed Gigabit Ethernet switch. With 24 PoE+ (Power over Ethernet) RJ-45 LAN ports and 4 10-Gigabit Ethernet SFP+ ports for high bandwidth uplinks to Servers, Network Attached Storage and Switches.
The 400 watt PoE power budget provides ample power through Ethernet, to each of its 24 PoE / PoE+ enabled Gigabit LAN ports. Supporting up to 30 watts per port, it can easily power a large number of IP cameras, IP phones, wireless APs and other PoE devices. Use the 4 SFP+ ports for high speed uplinks between Switches, Servers and Network-Attached-Storage at up to 10 Gigabits per port.
Designed for centralised management, the VigorSwitch P2280x can be provisioned and monitored through both the VigorACS management platform and/or, a DrayTek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router and clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches.
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable. Power up to 24 devices at up to 30 watts per port
Layer 2+ VLAN Routing
Use the VigorSwitch to link multiple subnets with Static Routers and VLAN Routing.
PoE Management
Schedule PoE device power. Monitor PoE device status, automatically restarting devices if they stop respoding.
Auto Surveillance VLAN
Recognises traffic from IP cameras and IP phones automatically and add COS tag for QoS prioritization.
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.
Access Control
VigorSwitch G2280x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter.
10GbE SFP+ Ports
4 SFP+ ports provide fast, high bandwidth uplinks to Fibre, Switches, Servers & Network Attached Storage.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
IPv6 Ready
VigorSwitch G2280x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
ONVIF IP Camera Management
Manage and view ONVIF capable cameras, automatically detecting their topology on the network.
Central Switch Management
Set up VLAN easily from the router and get centralized hierarchy view of the switches.
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
Key Features
- 24 x RJ-45 Gigabit Ethernet ports with PoE+.
- 4 x SFP+ 10GbE ports for Uplink / Fibre.
- PoE (Power-over-Ethernet) for IP phones, wireless access points, IP cameras etc.
- Generous power budget (400W total).
- 802.3af (PoE) ad 802.3at (High Power PoE)
- 802.1q VLANs (Tag, Port & MAC-based)
- VLAN Routing & Static Route with DHCP server / relay.
- Virtual Router Redundancy Protocol.
- QoS for Application traffic prioritisation.
- 802.1x RADIUS / TACACS+ Port Authentication with Accounting.
- Voice VLAN for QoS (OUI Mode).
- Access Control List (ACL).
- Port Mirroring & Link Aggregation.
- IGMP Snooping/Querier (up to 256 Multicast Groups).
- IPv4 and IPv6 Support.
- Hardware Monitor with smart fan control.
- Centrally managed or standalone operation.
- Console Port
Downloads
Datasheet
About This Product
The VigorSwitch P2280x is a high-performance, L2+ Managed Gigabit Ethernet switch. With 24 PoE+ (Power over Ethernet) RJ-45 LAN ports and 4 10-Gigabit Ethernet SFP+ ports for high bandwidth uplinks to Servers, Network Attached Storage and Switches.
The 400 watt PoE power budget provides ample power through Ethernet, to each of its 24 PoE / PoE+ enabled Gigabit LAN ports. Supporting up to 30 watts per port, it can easily power a large number of IP cameras, IP phones, wireless APs and other PoE devices. Use the 4 SFP+ ports for high speed uplinks between Switches, Servers and Network-Attached-Storage at up to 10 Gigabits per port.
Designed for centralised management, the VigorSwitch P2280x can be provisioned and monitored through both the VigorACS management platform and/or, a DrayTek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router and clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches.
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable. Power up to 24 devices at up to 30 watts per port
Layer 2+ VLAN Routing
Use the VigorSwitch to link multiple subnets with Static Routers and VLAN Routing.
PoE Management
Schedule PoE device power. Monitor PoE device status, automatically restarting devices if they stop respoding.
Auto Surveillance VLAN
Recognises traffic from IP cameras and IP phones automatically and add COS tag for QoS prioritization.
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.
Access Control
VigorSwitch G2280x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter.
10GbE SFP+ Ports
4 SFP+ ports provide fast, high bandwidth uplinks to Fibre, Switches, Servers & Network Attached Storage.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
IPv6 Ready
VigorSwitch G2280x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
ONVIF IP Camera Management
Manage and view ONVIF capable cameras, automatically detecting their topology on the network.
Central Switch Management
Set up VLAN easily from the router and get centralized hierarchy view of the switches.
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
Related Products
DrayTek VigorSwitch 48-Port Gigabit PoE+Managed Switch & 6 x 10GbE SFP+ Ports | VSP2540X-K
Contact Support
Out of Stock
DrayTek P1282 VigorSwitch 24-Port Smart Managed Gigabit PoE+ Switch | VSP1282-K
Out of Stock
